1 (844) 338-5520 Call 125 W.Victoria Street, Gardena, CA 90248 Location

Pentair ROmate® -60 Reverse Osmosis Pressurized Storage Tank

Click Thumbnail to Zoom

Pentair ROmate® -60 Reverse Osmosis Pressurized Storage Tank

Availability: In stock

$885.12
  • OR

    Applications

    RO/High Purity Water Storage and Dispensing

    Features and Benefits
    • 100% seamless composite construction
    • 100% lead-free design
    • Produced using NSF® and/or FDA listed materials
    • Built-in union connection
    • Superior corrosion resistance
    • Will not introduce chemicals or elements into water
    • Easy to install and service
    Installation Tips

    Install a properly-sized pressure relief valve to protect the tank from over-pressurization. The pressure relief setting should be less than the maximum rated operating pressure of the tank.
    To ensure adequate flow and pressure to the water-using equipment, do not reduce piping/tubing size between storage tank and distribution plumbing. Piping/tubing size from the RO unit to the storage tank can be smaller than the distribution piping/tubing from the storage tank to the water-using equipment. Product water tubing/piping and fittings should be suitable for use with high purity water.
    Select a location capable of supporting the normal operating weight of the tank with a safety factor of at least 2 times.

    Operation Tips

    Drain water from tank and check storage tank pre-charge pressure on an annual basis.
    Sanitize storage tank on an annual basis.
    As pre-charge pressure varies, so does stored water volume and useable pressure. To follow are two simple descriptions of that relationship when all other factors remain equal:

    • Lower pre-charge pressures allow the storage tank to accept more water, but water pressure diminishes more rapidly as water is drawn.
    • Higher pre-charge pressures allow the storage tank to accept less water, but water pressure diminishes less rapidly as water is drawn .

    Rapid on-off cycling of RO system may indicate insufficient pre-charge pressure. Drain water from tank and check pre-charge, then adjust as necessary.

    Sizing

    Usable capacity will vary based on tank size, pre-charge pressure and RO system on-off pressure setting. The data shown below is one capacity example based on a 28 psi (1.9 bar) pre-charge with useable storage between 30/50 psi (2.1/3.4 bar):

    ROmate 15 4.3 gallons (16.2 L)
    ROmate 20 5.8 gallons (22.1 L)
    ROmate 30 8.7 gallons (33.0 L)
    ROmate 40 11.9 gallons (45.0 L)
    ROmate 60 17.7 gallons (67.0 L)
    ROmate 80 25.6 gallons (96.9 L)
    ROmate 120 35.4 gallons (134.0 L)
    Specifications
    ROmate 15 ROmate 20 ROmate 30 ROmate 40 ROmate 60 ROmate 80 ROmate 120
    Maximum Operating Pressure 125 psi (8.62 bar), non-shock
    Pre-Charge Pressure Requirements 5 - 50 psi (0.35 - 3.45 bar), typical
    Pre-Charge Pressure Requirements 120°F (49°C)
    Overall Dimensions 26" H x 16" D
    (66 cm x 41 cm)
    32" H x 16" D
    (81 cm x 41 cm)
    44" H x 16" D
    (112 cm x 41 cm)
    57" H x 16" D
    (145 cm x 41 cm)
    41.5" H x 24" D
    (105 cm x 61 cm)
    55.25" H x 24" D
    (140 cm x 61 cm)
    74.25" H x 24" D
    (189 cm x 61 cm)
    Inlet and Outlet Connection 1" Male NPT 1" Male NPT 1" Male NPT 1" Male NPT 1-1/4" Male NPT 1-1/4" Male NPT 1-1/4" Male NPT
    Shipping Weight 20 lbs (9.1 kgs) 24 lbs (10.9 kgs) 28 lbs (12.7 kgs) 35 lbs (12.7 kgs) 55 lbs (24.9 kgs) 63 lbs (28.6 kgs) 90 lbs (40.8 kgs)
    Approximate Operating Weight @ 50 psi (3.45 bar) With 5 psi (0.35 bar) Pre-Charge 99.2 lbs
    (45.0 kgs)
    134.0 lbs
    (68.8 kgs)
    194.3 lbs
    (88.1 kgs)
    264.0 lbs
    (119.8 kgs)
    398.5 lbs
    (180.7 kgs)
    651.5 lbs
    (254.7 kgs)
    780.2 lbs
    (353.9 kgs)

    Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect in January 2014.